Comments
-
No, not that am aware of and both udp and tcp.
-
Hello, OID for the 18432Mb was fa:8f:ca and for the 3075Mb aa:a2:e9. This was observed remotely. K
-
-
As I understand it the location is based on GeoIP of the source IP address of the FW appliance and thus all private addresses end up in California. K
-
Was just testing snmp on 1.1.0.2-17s. Snmp is not available yet in the menu, although indicated in the Admin Guide and CLI config resulted in snmpwalk responce of "value NULL." or SNMPv2-MIB::system = NULL, Error: OID not increasing: SNMPv2-MIB::system Enabling and disabling snmp seems to work though, get no responce. K
-
Means the source ip address of the traffic is not in the routing table, weather that is due to ospf timeouts or other?
-
For emergencies check out Slimjet brower at https://www.slimjet.com/ worked for me, but slowly. K
-
Kindly query the checksum for the patch file as it´s missing and share it here or in MySonicWALL. K
-
This did not work for me, vpn routes refused to stick from either side of Gen6/Gen7 configuration. Re K
-
Hello, Anyone seen statements regarding the SRA and SMA systems? K